Which Short Throw Is Better
#1
Bullitt Member
Thread Starter
Join Date: April 14, 2011
Location: Southeast Texas
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Which Short Throw Is Better
Steeda Tri-Ax or the Barton Short throw??
Please help me out on this if you have any of this shifters in your car..
Please help me out on this if you have any of this shifters in your car..
#3
There's really no way to say which is best, as a shifter is all about personal preference. Some people prefer the long, muscle-car like throws of the stock shifter, some people want it super quick and/or notchy.
The Steeda Tri-Ax provides a 20% reduction vs. 40% for the Barton, but that's not to say one or the other is better. They both work perfectly well, so it's up to you to decide how short of a throw you want.
No matter what, I highly recommend picking up a Barton bracket. Even with the stock shifter, it's life changing!
The Steeda Tri-Ax provides a 20% reduction vs. 40% for the Barton, but that's not to say one or the other is better. They both work perfectly well, so it's up to you to decide how short of a throw you want.
No matter what, I highly recommend picking up a Barton bracket. Even with the stock shifter, it's life changing!
#4
Mach 1 Member
Join Date: July 15, 2010
Location: Greenville NC
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
and both are a simple pivot assembly replacement. If you want a complete system, wait for the MGW which will incorporate a complete mount and base assembly in addition to the Pivot stuff at somewhere around a 20-24% reduction. The entire stock assembly is mounted in rubber bushings. The Barton bracket removes part of the rubberiness, but not all. The MGW will address it all and likely be the most precise solution out there.. Probably a month or so out according to their postings..
#5
GT Member
Join Date: February 11, 2011
Location: Indianapolis
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
I used the Steeda shifter and Barton bushing, they both work great together. It would be nice to replace the linkage and that "box" the pivot side of the Tri-ax goes into. I am very interested in the MGW piece and if I can get just the under-car portion of it.
#6
Bullitt Member
Join Date: January 19, 2011
Location: Montgomery, AL
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
+1 on the MGW. I'm waiting for user feedback from that before making my decision. While I'm not really disappointed with the stock shifter (actually far from it) I'm eager to hear what the MGW shifter brings to the table.
Both adam from Joe heck racing and the guys from MGW say that the throw from the factory shifter is quite good and shouldn't be shortened much more than what it already is due to possible synchro damage or something along those lines.
From that argument, I'd say the steeda would be a better choice but I think that ultimately, this MGW shifter is going to be the one to get. It's probably going to cost around twice what the steeda/barton cost but if it means a properly shifting transmission, I'm sure that it will be worth the extra cost.
my 2 cents.
Both adam from Joe heck racing and the guys from MGW say that the throw from the factory shifter is quite good and shouldn't be shortened much more than what it already is due to possible synchro damage or something along those lines.
From that argument, I'd say the steeda would be a better choice but I think that ultimately, this MGW shifter is going to be the one to get. It's probably going to cost around twice what the steeda/barton cost but if it means a properly shifting transmission, I'm sure that it will be worth the extra cost.
my 2 cents.
#7
Bullitt Member
Join Date: March 24, 2011
Location: Roswell, New Mexico
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
and both are a simple pivot assembly replacement. If you want a complete system, wait for the MGW which will incorporate a complete mount and base assembly in addition to the Pivot stuff at somewhere around a 20-24% reduction. The entire stock assembly is mounted in rubber bushings. The Barton bracket removes part of the rubberiness, but not all. The MGW will address it all and likely be the most precise solution out there.. Probably a month or so out according to their postings..
Last edited by fake; 5/21/11 at 10:47 AM.
#8
Bullitt Member
and both are a simple pivot assembly replacement. If you want a complete system, wait for the MGW which will incorporate a complete mount and base assembly in addition to the Pivot stuff at somewhere around a 20-24% reduction. The entire stock assembly is mounted in rubber bushings. The Barton bracket removes part of the rubberiness, but not all. The MGW will address it all and likely be the most precise solution out there.. Probably a month or so out according to their postings..
Last edited by SD6; 5/21/11 at 10:55 AM.
#9
I have had 3 mgws in 3 different Mustangs. They have all been top notch quality and George stands behind his product. if my 11 were a manual I would get the MGW as soon as it hit the market. Just my .02
#10
Cobra Member
I have the barton shifter and bracket. I absolutely love it. I have no first hand information concerning the steeda unit, but I've never had a Steeda part that wasn't first rate, so the assumption is that it would be a great piece as well....
#11
Bullitt Member
Thread Starter
Join Date: April 14, 2011
Location: Southeast Texas
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Ima starting to lean toward the barton shifter now unless MGW comes out with there shifter within the next month
Last edited by ZackeryJc; 5/23/11 at 07:14 PM.
#12
Bullitt Member
Join Date: December 21, 2010
Location: NoVA
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
#14
Bullitt Member
Thread Starter
Join Date: April 14, 2011
Location: Southeast Texas
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LEwis26
Just installed my Barton and bracket and love it. A nice satisfying click into gear and super short throws. And no more missed 2-3 shifts
#17
Bullitt Member
Thread Starter
Join Date: April 14, 2011
Location: Southeast Texas
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kona Blur
Has anyone considered the new Hurst shifter that comes out next month?
#18
Mach 1 Member
Join Date: October 14, 2010
Location: saskatoon
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
For the 6 speed the mgw seems to be the best one. For the 5 speed the tri-ax is great but the mgw is top of the line. I have a tri-ax and couldn't be happier but I also have a t-45. The pro 5.0 is nice too for the 5 speed
#19
Team Mustang Source
Join Date: May 25, 2005
Location: Skopje, Macedonia
Posts: 1,267
Received 0 Likes
on
0 Posts
I have the Steeda unit with the Barton brace and I'm good with it. I know that MGW has a reputation for being the best, but I can't speak on it because I have never seen or used one. Hurst is a good shifter and looks real good in the car.