I'm supercharged now!

Reply Subscribe

Thread Tools

Search this Thread

8/31/13, 12:03 PM

#21

GT50GO

Bullitt Member

Thread Starter

Join Date: December 9, 2012

Posts: 370

Likes: 0

Received 3 Likes on 3 Posts

Quote:

Originally Posted by MikeR

Agreed... it just seems counter-intuitive to me that they would recommend (for his hot climate) to go with a smaller pulley and closed air box and not the stock pulley and "cold air intake".

Yes, I'm not 100% on that choice (heat) either but I'm sure he'll chime in.

Reply Like

8/31/13, 12:07 PM

#22

MikeR

V6 Member

Join Date: March 8, 2011

Posts: 91

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by GT50GO

Yes, I'm not 100% on that choice (heat) either but I'm sure he'll chime in.

While we're at it... I didn't think a BAP was necessary when under 600WHP. I'd be curious to know the benefits.

Reply Like

8/31/13, 12:29 PM

#23

GT50GO

Bullitt Member

Thread Starter

Join Date: December 9, 2012

Posts: 370

Likes: 0

Received 3 Likes on 3 Posts

Quote:

Originally Posted by MikeR

While we're at it... I didn't think a BAP was necessary when under 600WHP. I'd be curious to know the benefits.

Well I'm going off what Brenspeed sells as a kit called 710r which consist of the SCT tuner & tune, Ken Bell BAP and if you were on a Stage one Roush SC the Roush CAI. This tune should get into a bit above 600 so I'm assuming they are using it as a safety feature. You might want to email Brenspeed and ask them there reasons If you don't get a good answer here. It's not a high price item and I'm sure it can't hurt LOL.

Reply Like

8/31/13, 01:16 PM

#24

cdynaco

Post *****

Join Date: December 14, 2007

Location: State of Jefferson Mountains USA

Posts: 20,005

Likes: 0

Received 4 Likes on 4 Posts

Quote:

Originally Posted by steven46746

I think the closed intakes will stay a bit cooler than the open elements in a hot climate.

Depends if the CAI matches the hood liner for a good seal.

Reply Like

8/31/13, 03:13 PM

#25

Stage_3

Roush Forum Stalker

Join Date: March 9, 2013

Location: Massachusetts

Posts: 11,165

Likes: 4,023

Received 1,749 Likes on 1,240 Posts

Quote:

Originally Posted by GT50GO

I know Brenspeed told me they wouldn't not recommend the 710r tune if I had a 82mm pulley due to it being a little to much torque that they like to see on the stock engine.

Very true. Those numbers are about the 600/625 horsepower at the crank. I am guessing the torque numbers go up as well.

Reply Like

8/31/13, 04:57 PM

#26

GT50GO

Bullitt Member

Thread Starter

Join Date: December 9, 2012

Posts: 370

Likes: 0

Received 3 Likes on 3 Posts

Quote:

Originally Posted by Stage_3

Very true. Those numbers are about the 600/625 horsepower at the crank. I am guessing the torque numbers go up as well.

You mean at the wheels correct? On paper it's 710hp at the crank, Brenspeeds website has a dyno being done that did over 600+rwhp and 500 +TQ with the package.

Reply Like