TPMS relearn process
6/15/18, 01:30 AM
#1
Member
Thread Starter
Join Date: June 15, 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
TPMS relearn process
I'm new here, but full of hope!
I've been following various forums/posts on this subject for the last 8 months and STILL have a problem.
Wheels were refurbed and all was fine (original band sensors fitted). Rear left needed to be redone so tyre back off etc. But the band snapped and I needed a new sensor. Long story short due to unavailability of original sensors, I bought a Smart Sensor pro+ in the UK from a tyre place in Hampshire.
It has never worked - Tire sensor fault message every start up. They swear blind it is compatible, have programmed it for '08 Mustang, it is 315 Mhz. NOTHING! Do the press brake, on-off routine god knows how often - NOTHING!
HELP!!!!
I've been following various forums/posts on this subject for the last 8 months and STILL have a problem.
Wheels were refurbed and all was fine (original band sensors fitted). Rear left needed to be redone so tyre back off etc. But the band snapped and I needed a new sensor. Long story short due to unavailability of original sensors, I bought a Smart Sensor pro+ in the UK from a tyre place in Hampshire.
It has never worked - Tire sensor fault message every start up. They swear blind it is compatible, have programmed it for '08 Mustang, it is 315 Mhz. NOTHING! Do the press brake, on-off routine god knows how often - NOTHING!
HELP!!!!
10/11/21, 10:44 PM
#3
2014 SGM Roush Stage 2 --------- Moderator------
Thread
Thread Starter
Forum
Replies
Last Post
