^ I like it, looks good!

I like it, got any in color?

Yeah but the car is White and black so it won't look much different.

True lol

The GT500 splitter looks amazing on your SGT! The reason I bought the same splitter yesterday for my black GT/CS! Thanks for the install pics, really will save me a lot of time! Your car is the best looking mustang I think I've ever seen. And the car I'm hoping to make mine similar to. Already have the black Shelby grille, splitter, and striker hood pins on the way! Can't believe how much people want for the CS40s wheels though! A little out of the ball park for me, but I'm still looking! Your car was the wallpaper on my iPad for awhile. Just an amazing looking car you have!

That looks great! Where can I pick one of these splitters up? Anymore pics out there?

Heads up if anyone is looking for the GT500 splitter, tascaparts dot com has them for $130 shipped. Cheapest I found around (everything on ebay is north of $200).

I got mine on the way, hopefully it will be installed soon

Thanks for the info, thats a good price i'm considering it.

thanks for the heads up, this is a great deal

Took a few weeks for them to inform me that the shipping was going to be over $100 instead of the $13 they initially quoted! Scratch that, it is not a good deal...

$100 for shipping WTH are they smoking, thats alot for shipping

Ok. Here's the scoop. I don't know about you guys that already have one, but I found a brand new 2009 GT500 splitter at my local dealership for $185. I snagged it. Turns out, it doesn't fit for crap. only FOUR of the 15 holes or so line up. I had to drill new holes and use bolts/nuts to secure the splitter. None of the holes on the inner fender well line up either. Had to use new screws there as well.

If you remove the original piece that the splitter sits under, you don't have to mod the splitter at all! It goes right up in place and it replaces the function of the old piece. Except for pretty much none of the holes lining up, it fits well. Regardless, I have it installed and secured. Here are some pics. Opinions....?

Attachment 202103

Attachment 202104

Attachment 202105

Attachment 202106

Attachment 202107

Looks mucho bueno

Great

Now I want a taco

:cheers:

I had to make all new holes for mine to fit

Attachment 202100
Attachment 202101


I used this weather stripping to cover the factory premade holes and to also fill the center gap in a little bit
http://sphotos-a.xx.fbcdn.net/hphoto...40709700_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...47828550_n.jpg

Here is a couple more finished pics

http://sphotos-b.xx.fbcdn.net/hphoto...40924478_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...13688393_n.jpg

Looks great but I couldn't get mine to come out as far as yours. The forward edge of mine is just about flush with the forward part of the bumper. The only holes that lined up were the two on either side of the center line for the plastic fasteners and the 7/32" bolts for the lower engine shroud. This is the best I could get it. I might tinker with it some more tomorrow.

Attachment 202094

Attachment 202095

Attachment 202096

Attachment 202097

I didn't use those holes. I drilled new ones.... posting a pic here in a second

Attachment 202093

-The red marks is where I drilled my new holes

-The shaded grey area is where I made an extension so the new splitter bolted to the splash shield

-The blue marks are ovaled holes I made in the new extesion so I would have a little adjustment to work with



The holes are not exactly as pictured, this is just a rough map to give you an idea how I did this.