Pedestal Spoiler Fitment
#21
Legacy TMS Member
It looks like the dealer forgot to put the plastic pieces that come with the spoiler under the base when it was mounted, look at the picture Last1 posted and check out the difference.
I put mine on my 2010 and it makes the spoiler sit level on the trunk and fills the gap that yours has.
I put mine on my 2010 and it makes the spoiler sit level on the trunk and fills the gap that yours has.
Last edited by Siber Express; 3/29/14 at 07:16 PM.
#22
Team Mustang Source
Join Date: January 15, 2005
Location: So. FL
Posts: 1,426
Likes: 0
Received 0 Likes
on
0 Posts
Maybe the dealer didn't bother drilling the extra 4 holes for the forward end of each pedestal, and maybe even didn't install the double-sided tape at the base of each pedestal. I've personally installed two OEM pedestal spoilers with no issues like this. They even come with a template to get the holes drilled in the exact location needed.
Here's a thread showing the one I installed on my 2012 Boss.
https://themustangsource.com/f813/ne...poiler-503865/
And another thread that should help.
https://themustangsource.com/f813/new-wing-494586/
Here's a thread showing the one I installed on my 2012 Boss.
https://themustangsource.com/f813/ne...poiler-503865/
And another thread that should help.
https://themustangsource.com/f813/new-wing-494586/
Last edited by SoFlaBoss; 3/29/14 at 09:19 PM.
#23
Cobra R Member
Thread Starter
The holes are there, and I believe the tape is too, but I haven't verified that 100%. The rubber bases are certainly missing, however. I'll have to call them Monday.
#24
Team Mustang Source
Join Date: January 15, 2005
Location: So. FL
Posts: 1,426
Likes: 0
Received 0 Likes
on
0 Posts
There are no rubber bases, just precut double-sided tape, which is maybe 1/32 to 1/16 thick.
Last edited by SoFlaBoss; 3/30/14 at 06:13 AM.
#25
Legacy TMS Member
Mine on my 2010 looked just like Last1's did, I don't have it now but it was the bottom piece the double sided tape was on. The bottom piece of the spoiler on mine had raised sections that actually fit into those pieces which is why his sits a little up of the trunk lid.
#26
Tasca Super Boss 429 Member
There's an AM video on YouTube regarding pre painted pedestal spoiler for 10-14. It's definitely a replica as they spray the entire thing body color.
The OEM is two part and fused with black plastic. Id check with folks who ordered it from AM and confirm it's quality and fitment before you plunk the coin.
The OEM is two part and fused with black plastic. Id check with folks who ordered it from AM and confirm it's quality and fitment before you plunk the coin.
Last edited by Getportfolio; 3/30/14 at 01:07 PM.
#27
Cobra R Member
Thread Starter
I might try and buy some thin rubber and cut it to fit the bases, see how it looks. It'll probably take forever but it should look better, I think. I can touch up the black parts and make that look nicer as well at the same time.
Thread
Thread Starter
Forum
Replies
Last Post