Got my sequential turn signal kit on monday the 27th from CDC installed them in under 30 min definitely worth the money!

:nice:

Working around the Shaker 1000 box was a ROYAL PITA!!! After dropping the socket one time too many, I removed the sub (which is what I recommend to do right off the bat). It took less than 5 minutes to pull the sub (4 screws and unsnap 2 harnesses). Once out the way, installation of the right sequential was smooth.

On a different note, pulling the sub did provide some surprises: 1. I didn't realize how heavy that sub was. 2. The side and floor panels of trunk are not painted. 3. I found a QC audit sticker that shows my baby's birthday (Oct 17, 2005 at 9:10AM).

wow i did not even check for that, dang, and yeah i dropped my only deepsocket behind the subs so i HAD to take out the subs, it sucked but it is true it is heavy as hel

hmm.. whats the work around the Shaker 1000 subwoofer?

Thanks, sorry for bringing this thread from the dead..

I have webelectric. question, the white light under the 3 redlight. What the function of those light? It doesn'r come on.

Those 2 white lights turn on only when you place your car in reverse.

yeah they are the reverse lights just be lucky we do not live in europe, i found a vid of a guy test driving a GT500 in england and noticed this
http://img.photobucket.com/albums/v6...ntitled200.jpg
if anyone can tell me the reason the reverse light can not be the same size as the american version then please chime in

I agree

I got my splice in kit coming on Wednesday from Stangmods. $80.00. Im hoping it should be an easy install. I am anticipationg some challenges but it sounds like its worth it.
http://memimage.cardomain.net/member...020_5_full.jpg

Webelectrics installed
 

And yet another thread revival - instead of starting another one. :-D

My bride got me the Webelectric sequentials for my birthday. Needless to say, I started to install them about 5 minutes after opening the box.

Installation was smooth as glass - truly "plug and play". I think they look great!

She also got me the doorsill letter inserts in gloss black. I'll put them on this weekend. :-D

Moss is running a special right now too for CDC if anyone is looking for a good deal.

what's the deal?

For those that did the install, what kind of protection did Web Electric include for the electronics? He wrapped the exposed circuit board with 3M electrical tape on the sequential kit I bought a month ago. It looks like TacoBill's is covered with a tube of some sort.

Just noticed this post even though it's old. Those are not Ford factory export lamps. They are aftermarket lamps used in the Euro market to meet local amber turn signal requirements. Look at the picture below. The reverse lamp is positioned in the bottom of the same section.

https://themustangsource.com/attachm...5&d=1257823446

BTW that vid is Jason Plato taking the GT500 for a test drive on Fifth Gear

I have no idea why those pry bars were needed. I installed the Webelectric OEM kit in my GT. The only tool I needed was an 11mm open end wrench and my fingers. No screw drivers or pry bars. All the bulbs pulled out of the sockets. The seals which fall apart looked like it was just a dab of putty pressed around the threads before the nut is tightened. Its an easy kit to install if you don't do the optional wires to the SJB which removes the sequence when the brakes are applied. I wonder how hard a similar Chaser harness would be to fabricate.

An owie?
 

Looking at Taco Bill's photos, I noticed that on that last one when he is holding the candy, there is a band-aid on his thumb. I didn't see that on the other images. What happened Taco?

I don't remember... That was over 3 years ago! :rofl2:

Would the squential harness from a '10 with LEDs fit in a '05 - '10?