2017 Season plans
#161
Shelby GT350 Member
Thread Starter
I had great luck with the 13.8 rears. But if you have the opportunity, go to 2-piece. The rears I just put on are running cooler than the fronts even with the 2-piece fronts and front ducting. Very very impressive and so light!
#162
I have thought about two piece and may in the future, but for now I am okay with what I have. I don't have your experience or ability on the track at this point, but hope to someday outgrow the current set up.
#163
Mach 1 Member
Delivered today, ready for shop install next week :-)
#164
Legacy TMS Member
Join Date: January 25, 2010
Location: Massachusetts
Posts: 3,760
Received 1,498 Likes
on
1,022 Posts
#165
Mach 1 Member
Originally Posted by Bert
Nice . . . do you have emissions inspection in Illinois; and what are you doing about the cats?
#166
Bullitt Member
Join Date: October 22, 2012
Location: West Bend, Wisconsin
Posts: 343
Likes: 0
Received 4 Likes
on
3 Posts
I run slotted 14" stoptechs front only. I rather enjoy them however am coming from GT blank front rotors anything is an improvement. Keep in mind I am using their 4 pot pistons as well. I have 3 events on the original stoptech pads. I may need to replace after Road America in July though. I will monitor. Eventually I will be adding slotted on the rears as well.
#167
Bullitt Member
Join Date: October 22, 2012
Location: West Bend, Wisconsin
Posts: 343
Likes: 0
Received 4 Likes
on
3 Posts
You lucky SOB!! I too am jellie. Did you trailer down there or drive? Just asking as I am a poor dude that doesn't have a trailer or tow vehicle. So I am confined to tracks within reasonable driving distance.
#168
Mach 1 Member
Originally Posted by V6 Driver
You lucky SOB!! I too am jellie. Did you trailer down there or drive? Just asking as I am a poor dude that doesn't have a trailer or tow vehicle. So I am confined to tracks within reasonable driving distance.
#169
Banned
Join Date: August 2, 2013
Location: Little north of Stuttgart, Germany
Posts: 3,090
Received 254 Likes
on
230 Posts
My season is about to start. I haven an event at Grattan, then 8 days laMter is Gingerman, and then 8 days after that is Mid-Ohio. I still need to get my new tires on, and I just realized as I was swapping my Cartobech XP10 pads on that I only have ~4mm left on them.
Grattan will not consume much, but Gingerman and Mid O will. So I'm in need of new pads. And I wanted to try something else, so I ordered Raybestos ST43s. Does anyone have any experience with those?
Grattan will not consume much, but Gingerman and Mid O will. So I'm in need of new pads. And I wanted to try something else, so I ordered Raybestos ST43s. Does anyone have any experience with those?
#170
Shelby GT350 Member
Thread Starter
My season is about to start. I haven an event at Grattan, then 8 days laMter is Gingerman, and then 8 days after that is Mid-Ohio. I still need to get my new tires on, and I just realized as I was swapping my Cartobech XP10 pads on that I only have ~4mm left on them.
Grattan will not consume much, but Gingerman and Mid O will. So I'm in need of new pads. And I wanted to try something else, so I ordered Raybestos ST43s. Does anyone have any experience with those?
Grattan will not consume much, but Gingerman and Mid O will. So I'm in need of new pads. And I wanted to try something else, so I ordered Raybestos ST43s. Does anyone have any experience with those?
#171
Banned
Join Date: August 2, 2013
Location: Little north of Stuttgart, Germany
Posts: 3,090
Received 254 Likes
on
230 Posts
those are my go to pads for rear. They're excellent. I use the ST47's up front and love them as well. Great modulation, great stopping power, and excellent wear characteristics I've found. I think you'll like them. If you want Raybestos for the fronts I might have a source for you as well
I will stat with the ST43s on the front. I don't run slicks, and I have no aero, so a less aggressive bite is hopefully what my car needs. If I like them I'll switch to Raybestos on the back too.
Where do you get your pads? Shoot me a PM if you can.
#172
Shelby GT350 Member
Thread Starter
Hey Derek, sweet, glad to hear it!
I will stat with the ST43s on the front. I don't run slicks, and I have no aero, so a less aggressive bite is hopefully what my car needs. If I like them I'll switch to Raybestos on the back too.
Where do you get your pads? Shoot me a PM if you can.
I will stat with the ST43s on the front. I don't run slicks, and I have no aero, so a less aggressive bite is hopefully what my car needs. If I like them I'll switch to Raybestos on the back too.
Where do you get your pads? Shoot me a PM if you can.
#173
Mach 1 Member
My season is about to start. I haven an event at Grattan, then 8 days laMter is Gingerman, and then 8 days after that is Mid-Ohio. I still need to get my new tires on, and I just realized as I was swapping my Cartobech XP10 pads on that I only have ~4mm left on them.
Grattan will not consume much, but Gingerman and Mid O will. So I'm in need of new pads. And I wanted to try something else, so I ordered Raybestos ST43s. Does anyone have any experience with those?
Grattan will not consume much, but Gingerman and Mid O will. So I'm in need of new pads. And I wanted to try something else, so I ordered Raybestos ST43s. Does anyone have any experience with those?
#175
Mach 1 Member
Originally Posted by 5.M0NSTER
Thanks SGwick, you as well!
And here is a few pics of y new rubber.
And here is a few pics of y new rubber.
#177
Mach 1 Member
Originally Posted by 5.M0NSTER
I like biiiiig blocks! They are 275/35-19 all around
#178
Shelby GT350 Member
Thread Starter
Lookimg good! Hope they work great for you. Found a deal on another set of wheels and tires here... I can't pass on an amazing deal. Now to figure out if the 305's fit up front...
#179
Mach 1 Member
Please let us know if you had to make any changes for 305s to fit up front and what the tire tread width was
#180
Shelby GT350 Member
Thread Starter