Ponies on The Run (Again)
I want a 'SLASH', not a steak knife cut.
C'mon Leo.. Who's your buddy?
Blower in Black or Polished?
Thrust M's in anthracite?
So you're saying no gauges with the Whipple install? Going to hook them up yourself or have them done?
Man, 1 day install before Knotts is risky! I know they're good, but 1 small issue will shut you down.
C'mon Leo.. Who's your buddy?
I'm going with the 500hp HO Whipple. Tuned by ST Motorsports. Should be good for a minimum of 440-450 RWHP consistently.
Tires/Wheels are going to be the Torq Thrust M 18x9 & 255/45-18 Nitto 555 and 18x10s on 285/40-18 Also Nittos.
Gauges will be cobalt or nexus ?? Wideband AF, Boost and H2O temp in a SOS gauge pod, including a Raptor shift light.
Tires/Wheels are going to be the Torq Thrust M 18x9 & 255/45-18 Nitto 555 and 18x10s on 285/40-18 Also Nittos.
Gauges will be cobalt or nexus ?? Wideband AF, Boost and H2O temp in a SOS gauge pod, including a Raptor shift light.
Blower in Black or Polished?
Thrust M's in anthracite?
So you're saying no gauges with the Whipple install? Going to hook them up yourself or have them done?
Man, 1 day install before Knotts is risky! I know they're good, but 1 small issue will shut you down.
Team Mustang Source
I want a 'SLASH', not a steak knife cut.
C'mon Leo.. Who's your buddy?
Blower in Black or Polished?
Black also looking at the extra large Intercooler reservoir
Thrust M's in anthracite?
Anthracite
So you're saying no gauges with the Whipple install? Going to hook them up yourself or have them done?
Nope... I'll have them installed somewhere but not immediately. Adam says I don't have to have them, the tune is solid enough. Still I want them and will be looking to getting the gauges as soon as possible.
Man, 1 day install before Knotts is risky! I know they're good, but 1 small issue will shut you down.
Tell me about it. So we'll see. I don't have my hopes set so high that I expect it to happen, but being this close I am anxious. They've done 60+ of these installs not included the custom made stuff he was very confident that a 1 day install is entirely doable. Again we'll see.
C'mon Leo.. Who's your buddy?
Blower in Black or Polished?
Black also looking at the extra large Intercooler reservoir
Thrust M's in anthracite?
Anthracite
So you're saying no gauges with the Whipple install? Going to hook them up yourself or have them done?
Nope... I'll have them installed somewhere but not immediately. Adam says I don't have to have them, the tune is solid enough. Still I want them and will be looking to getting the gauges as soon as possible.
Man, 1 day install before Knotts is risky! I know they're good, but 1 small issue will shut you down.
Tell me about it. So we'll see. I don't have my hopes set so high that I expect it to happen, but being this close I am anxious. They've done 60+ of these installs not included the custom made stuff he was very confident that a 1 day install is entirely doable. Again we'll see.
Brian- Did you see Fluidyne's larger SC intercooler? Aways good to know what your options are.
Good deal on the rest. Amazing that ST can knock out an install and dyno tune in a work day. Mine will end up taking 3 weekends and several couple hour weekdays... and that's without removing the front bumper!
New wheels & tires will look awesome!
Good deal on the rest. Amazing that ST can knock out an install and dyno tune in a work day. Mine will end up taking 3 weekends and several couple hour weekdays... and that's without removing the front bumper!
New wheels & tires will look awesome!
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Bon Voyage Bill!
I hooked Bill up with my custom mobile bar!
1. Appleton Rum 21 year old (slow sippin) rum, savor! This is the high end stuff Zan Lamprey mixed with soda that bone head.
2. Sauza Commerativo Anjeo Tequilla
3. Jose Quervo Tradicion Tequilla
Looks like each vile holds 1.5 oz of pleasure! I inclued a mini funnel so you can recharge them. Have a great time on the LOVE boat!
Jed
1. Appleton Rum 21 year old (slow sippin) rum, savor! This is the high end stuff Zan Lamprey mixed with soda that bone head.
2. Sauza Commerativo Anjeo Tequilla
3. Jose Quervo Tradicion Tequilla
Looks like each vile holds 1.5 oz of pleasure! I inclued a mini funnel so you can recharge them. Have a great time on the LOVE boat!
Jed
Last edited by JedCranium; 4/4/08 at 01:10 AM.
With all this booze, I hope to remember just a fraction of this vacation.
I hope this mini-bar makes it past security! It looks lethal!
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Brian- Did you see Fluidyne's larger SC intercooler? Aways good to know what your options are.
Good deal on the rest. Amazing that ST can knock out an install and dyno tune in a work day. Mine will end up taking 3 weekends and several couple hour weekdays... and that's without removing the front bumper!
New wheels & tires will look awesome!
Good deal on the rest. Amazing that ST can knock out an install and dyno tune in a work day. Mine will end up taking 3 weekends and several couple hour weekdays... and that's without removing the front bumper!
New wheels & tires will look awesome!
Jed
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Great shots George! Does this cockpit below look familiar use the mouse and the + - zoom control at the bottom left of the page. This picture uses full 360 scanning try it!
Jed
http://www.panoscan.com/Shuttle/FlightDeck/Full.mov
Jed
http://www.panoscan.com/Shuttle/FlightDeck/Full.mov
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Sa-weet
Whoa- TMI...
Alright, I'd love to keep this completely under wraps but I can't and because I gotta rant a little bit.
I have the $$$ money and quotes and everything else lined up and ready to go FI via the Whipple. ST Motorsports will do the install and is waiting for me to set a date, which I won't do.... because.....<rant> the F*&#ing banks/financial inst. had their collective heads up their collective butts. Just when I think everything is under control and ready to go I find out, today..TODAY, that they for some G'd reason have my street name wrong. Did it get sent to me ? Will it get to me ?? it's all a big question mark.</rant>
So to answer any questions. Here is what I'm doing, which of little surprise to anyone here.
I'm going with the 500hp HO Whipple. Tuned by ST Motorsports. Should be good for a minimum of 440-450 RWHP consistently.
Tires/Wheels are going to be the Torq Thrust M 18x9 & 255/45-18 Nitto 555 and 18x10s on 285/40-18 Also Nittos.
Gauges will be cobalt or nexus ?? Wideband AF, Boost and H2O temp in a SOS gauge pod, including a Raptor shift light. These however will wait for me to sell the things I have to sell C&L, UDP, Hurst and the Bullitts.
Best estimates right now being optimistic is believe it or not, the weekend of Knott's !! Possibly that Saturday. If not the following. Either way I could be done by the end of the month. However my luck with this shiite it could be August LOL.
Stupid banks.
Whoa- TMI...
Alright, I'd love to keep this completely under wraps but I can't and because I gotta rant a little bit.
I have the $$$ money and quotes and everything else lined up and ready to go FI via the Whipple. ST Motorsports will do the install and is waiting for me to set a date, which I won't do.... because.....<rant> the F*&#ing banks/financial inst. had their collective heads up their collective butts. Just when I think everything is under control and ready to go I find out, today..TODAY, that they for some G'd reason have my street name wrong. Did it get sent to me ? Will it get to me ?? it's all a big question mark.</rant>
So to answer any questions. Here is what I'm doing, which of little surprise to anyone here.
I'm going with the 500hp HO Whipple. Tuned by ST Motorsports. Should be good for a minimum of 440-450 RWHP consistently.
Tires/Wheels are going to be the Torq Thrust M 18x9 & 255/45-18 Nitto 555 and 18x10s on 285/40-18 Also Nittos.
Gauges will be cobalt or nexus ?? Wideband AF, Boost and H2O temp in a SOS gauge pod, including a Raptor shift light. These however will wait for me to sell the things I have to sell C&L, UDP, Hurst and the Bullitts.
Best estimates right now being optimistic is believe it or not, the weekend of Knott's !! Possibly that Saturday. If not the following. Either way I could be done by the end of the month. However my luck with this shiite it could be August LOL.
Stupid banks.
I'm going to need a blower soon or I may be exiled.
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Team Mustang Source
Exiled... NEVER.... At least one of us ought to have a Stang that hasn't blown out the bottom end yet
In Other News...
It doesn't really affect us, but it doesn't sound good for us Californians
Autoblog link
In Other News...
It doesn't really affect us, but it doesn't sound good for us Californians
Autoblog link
Last edited by habu; 4/4/08 at 09:27 AM.
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Happy B-Day to our long lost buddy Steve.
http://forums.bradbarnett.net/member.php?u=100742
http://forums.bradbarnett.net/member.php?u=100742
In Other News...
It doesn't really affect us, but it doesn't sound good for us Californians
Autoblog link
It doesn't really affect us, but it doesn't sound good for us Californians
Autoblog link
First Amendment to the Constitution "right of the people to peaceably assemble". I guess the Federal Constitution is TP in the People's Republic of Kalifornia. Be careful you hooligans.