Ponies on The Run (Again)
Legacy TMS Member
Thanks...... yes indeed it is the Raptor shiftlight.
In my opinion, you need all three guages- boost, fuel pressure, and AF. Some will argue that you don't need FP if you have AF which, to some degree, is true.... however I think all three is mandatory.
If I had it to do over again, I would have just bought the 2 Aeroforce guages (the ones I mounted in my dash) because they each display 2 parameters (2 gauges = 4 parameters total) and with the right add-ons they'll do AF & Boost as well as all of the other capabilities that they offer. They plug right into the OBD port, so you get battery voltage, water temp, oil temp, ignition timing, mass air meter counts, throttle %, blah blah blah..... really cool units.
NTTAWWT
I myself like all the guages I can get, mechanical ones. Not super riced out, but so that I know as much as I can. I like the CDC center stack guage pod, but I wouldnt be too crazy about cutting into the dash. I wanna go with the cobalt guages, and make the green to blue LED swap, so I can have the blue theme continued.
You can always take the supercharger off Bill...
What diameter are the center A/C vents?
You can always take the supercharger off Bill...
What diameter are the center A/C vents?
Luis, day is almost done.. where's the new tint pics?
Shelby GT350 Member
Join Date: April 9, 2007
Location: Ellenton, FL
Posts: 2,463
Likes: 0
Received 0 Likes
on
0 Posts
Looks good Luis.
Yeah I'm still unsure ill do gauges immediately. Cut initial cost. But when I do get then I deff want the three. Fuel pressure boost(do I need one which displays vacum?) and af gauge
Yeah I'm still unsure ill do gauges immediately. Cut initial cost. But when I do get then I deff want the three. Fuel pressure boost(do I need one which displays vacum?) and af gauge
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Looking good Luis.
I just scored a Escort Solo S2 radar detector of craigslist for $150. Should have it by then end of the week assuming it's not a scam. Once I get it and see that it actually works I'll be buying a nifty mount like Bill's.
I just scored a Escort Solo S2 radar detector of craigslist for $150. Should have it by then end of the week assuming it's not a scam. Once I get it and see that it actually works I'll be buying a nifty mount like Bill's.
Cobra Member
Join Date: November 15, 2007
Location: Torrance, CA
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
Leo - great find better post pics when you get it.
Thanks for the compliments guys
From what I understand, can't hurt. Any postive boost will show on the gauge just as well as a boost only gauge.
Tom1 did the research on this a while back and I'm pretty sure he went with a vacuum/boost gauge.
Awesome! I think I got mine for around $220 or so (used) off ebay.
For anyone wondering what mount Leo's referring to, it's the billet mount from Chotis Engineering.
I drove by it every Tuesday! Chris and I used to look for it on the way to Judo. We'll be cruzin' by your street tonight!
Tom1 did the research on this a while back and I'm pretty sure he went with a vacuum/boost gauge.
For anyone wondering what mount Leo's referring to, it's the billet mount from Chotis Engineering.
I drove by it every Tuesday! Chris and I used to look for it on the way to Judo. We'll be cruzin' by your street tonight!
Shelby GT350 Member
Join Date: April 9, 2007
Location: Ellenton, FL
Posts: 2,463
Likes: 0
Received 0 Likes
on
0 Posts
From what I understand, can't hurt. Any postive boost will show on the gauge just as well as a boost only gauge.
Tom1 did the research on this a while back and I'm pretty sure he went with a vacuum/boost gauge.
Awesome! I think I got mine for around $220 or so (used) off ebay.
For anyone wondering what mount Leo's referring to, it's the billet mount from Chotis Engineering.
Tom1 did the research on this a while back and I'm pretty sure he went with a vacuum/boost gauge.
Awesome! I think I got mine for around $220 or so (used) off ebay.
For anyone wondering what mount Leo's referring to, it's the billet mount from Chotis Engineering.
I love that radar mount. Have one myself and its worth every penny
Cobra Member
Join Date: November 15, 2007
Location: Torrance, CA
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
Shelby GT350 Member
Join Date: April 9, 2007
Location: Ellenton, FL
Posts: 2,463
Likes: 0
Received 0 Likes
on
0 Posts
Dunno.. 'copy & pasted' from the SOS website. Auto Meter has like 20 different gauges, good luck!
Shelby GT350 Member
Join Date: April 9, 2007
Location: Ellenton, FL
Posts: 2,463
Likes: 0
Received 0 Likes
on
0 Posts
Bill or Leo, what model year does the K&N CAI that I have fit? Is it just 05-06 and 07 needs a different bracket? Someones interested in it but they have an 07. Where would they look to get the alternate bracket if they needed it.
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
I checked on the K&N website and tried entering 05 stang then 07. Both gave me the same part number. So don't see how there'd be a problem.
Bill can you post or email me the link for the website that sells the rear view brackets?
Legacy TMS Member
Just FYI, those are Autometer Nexus gauges.
Uh, can you say expensive???? But, if you buy the add-on, you can change their illumination color.
Uh, can you say expensive???? But, if you buy the add-on, you can change their illumination color.
Shelby GT350 Member
Join Date: April 9, 2007
Location: Ellenton, FL
Posts: 2,463
Likes: 0
Received 0 Likes
on
0 Posts
** Note: It has been brought to my attention that this particular bracket will NOT fit to the 2007 (and subsequent) camcover due to a redesign. Contact K&N to see if they can supply the correct bracket.
When do you get your car back?