Ponies on The Run (Again)
4/8/10, 06:15 PM
Team Mustang Source
Rebuild is likely soon. It will allow me to solve some of the nagging 'old truck' symptoms it has as well as the nasty oil drip from somewhere. As well as rebuilding the trans, replacing steering box, alt, P/S pump, H20 and starter. Figure that the machine shop should be fairly cheap and Jason and I will build it once we get the parts back. After machine work, it shouldn't take too long to get it running again.
But I will replace whatever it needs just to drive it for the time being.
Um... yeah.....
Wanted to upgrade anyway. They'll likely announce new iPhone hardware before the OS comes out.
It was in Van Nuys. They built the planes there before they moved to Palmdale.
If you do the math when he talks about going 1 mile in 1.6 seconds, it's 3.92 mach, which at the altitude he was at, approx 80K, is 2,249.3MPH
I will be buying Sled Driver this weekend
4/8/10, 06:15 PM
Didn't Doug (Burningman) post one from Microsoft that folds in half ? And does lots of good things ? I'm just using an itouch right now so it's a pita to look around.
4/8/10, 08:53 PM
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
I bought the 32g wifi version the 3G version won't be out till the end of April. I filled it with a bunch of movies, it will work great on the airplane. the battery is incredible!!! my net book would die after 2 or 3 hours, but this thing just keeps on going, I have used it for two days and the battery is still at 90%
I have a feeling it's what it is... It's what I get for beating on an old truck that probably never saw more than 4,000 rpm. Stupid, yes. Do I know the truck's limit, yep
Rebuild is likely soon. It will allow me to solve some of the nagging 'old truck' symptoms it has as well as the nasty oil drip from somewhere. As well as rebuilding the trans, replacing steering box, alt, P/S pump, H20 and starter. Figure that the machine shop should be fairly cheap and Jason and I will build it once we get the parts back. After machine work, it shouldn't take too long to get it running again.
But I will replace whatever it needs just to drive it for the time being.
Rebuild is likely soon. It will allow me to solve some of the nagging 'old truck' symptoms it has as well as the nasty oil drip from somewhere. As well as rebuilding the trans, replacing steering box, alt, P/S pump, H20 and starter. Figure that the machine shop should be fairly cheap and Jason and I will build it once we get the parts back. After machine work, it shouldn't take too long to get it running again.
But I will replace whatever it needs just to drive it for the time being.
4/8/10, 09:18 PM
Bullitt Member
Join Date: September 2, 2007
Location: Ladera Ranch, CA.
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
4/8/10, 09:36 PM
http://www.techradar.com/news/mobile...-leaked-675096
4/8/10, 11:38 PM
Team Mustang Source
4/9/10, 01:23 AM
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
From the rumors I've been reading online the next gen iphone will be called the iphoneHD. Announcement/Release date is supposed to be June 22. June 22 seems ways a way.
4/9/10, 06:53 AM
You think June is a long ways away, how about the 2nd gen iPad?
Makes you just want to jump on board now, then sell it when the 2nd gen comes out.
4/9/10, 06:57 AM
After all, wasn't that the original intent? An affordable, maintenance free DD?
4/9/10, 07:26 AM
Anyone watching the UFC tomorrow night? 
My picks..
Silva
BJ Penn
Gracie
My picks..
Silva
BJ Penn
Gracie
4/9/10, 07:30 AM
Mustang news...
I'm still getting a little bit of oil gunk spooge coming out of my Pass. side breather even after installing the oil cap breather. Not as bad as before, but was hoping the extra breather would eliminate it.
Car seems to run great though, guess that's what counts.
I'm still getting a little bit of oil gunk spooge coming out of my Pass. side breather even after installing the oil cap breather. Not as bad as before, but was hoping the extra breather would eliminate it.
Car seems to run great though, guess that's what counts.
4/9/10, 07:34 AM
BoogieNights Studios:
Official Fluffer
Official Fluffer
Join Date: September 13, 2009
Location: Clarksville, TN
Posts: 5,520
Likes: 0
Received 5 Likes
on
5 Posts
Just wanted to say whats up with all of y'all
Hope everything is going better for you guys than it is for me. If ya wanna know whats going on here on my end check out MCTC
Hope everything is going better for you guys than it is for me. If ya wanna know whats going on here on my end check out MCTC
4/9/10, 09:03 AM
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
Mustang news...
I'm still getting a little bit of oil gunk spooge coming out of my Pass. side breather even after installing the oil cap breather. Not as bad as before, but was hoping the extra breather would eliminate it.
Car seems to run great though, guess that's what counts.
I'm still getting a little bit of oil gunk spooge coming out of my Pass. side breather even after installing the oil cap breather. Not as bad as before, but was hoping the extra breather would eliminate it.
Car seems to run great though, guess that's what counts.
---------------
Anybody have a set of stock mirrors laying around? I really need to get my A47 mirros painted and would like some stockers so I can still drive around while the others are being painted.
SHR door handles are "out for delivery".
Last edited by LEO_06GT; 4/9/10 at 09:08 AM.
4/9/10, 09:41 AM
Looking forward to the review on how easy they are to install, and fit and finish.
4/9/10, 09:41 AM
Leo, found another shirt for you. Maybe for SEMA?
4/9/10, 10:19 AM
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
I'll try to take some pics and difficulty of install rating too.
4/9/10, 10:28 AM
The A47 mirrors look good, but not that good to me. If I wanted them, I could've beat Brian to the punch with Luis'.
My Tacoma mirrors are huge truck mirrors, those I wouldn't want on the stang.
My Tacoma mirrors are huge truck mirrors, those I wouldn't want on the stang.
4/9/10, 10:44 AM
Legacy TMS Member
Join Date: May 24, 2006
Location: San Diego
Posts: 7,409
Likes: 0
Received 0 Likes
on
0 Posts
I think the A47 mirrors would look good if you got them painted like 05GTO.C.D.
Last edited by LEO_06GT; 4/9/10 at 10:48 AM.
