Ponies on The Run (Again)
11/11/08, 04:15 PM
Leo, I hope your pics and video put this guy to shame.. http://www.youtube.com/watch?v=fVK_9ZdZIx0 
11/11/08, 04:18 PM
Legacy TMS Member
Leo, I hope your pics and video put this guy to shame.. http://www.youtube.com/watch?v=fVK_9ZdZIx0
11/11/08, 04:55 PM
Cobra Member
Join Date: March 3, 2007
Location: Eden Prairie, MN
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
Hey everyone, here is a list of what I bought:
"Polished Vortech Supercharger V-2(Comes with Two Pulleys)
Polished After Cooler
Inlet Tube, Filter ,Mass Air Meter,
Diablo MAFia
39lbs Injectors
All Brackets, Tensiors Pulleys, Spacers, Bolts you want be searching the Hardware store for nothing
Complete instructions
All Clamps and Hoses
Cooler Resorvier, Cooler Mounts, Cooler itself, Cooler Pump
PS mount Relocater, PS Hoses
All the Stock Items that must be Modifed already Done...Coolant lines and Crossover
Vortech Diablosport Tunner with 3 Vortech tunes"
I will be getting a dyno tune in my local area, using my current SCT Xcal2.
What else do I need to complete this kit? I know I need a fuel pump upgrade like a KB BAP or GT500 system, but is there anything else? I currently have Steeda CMDP's on my car, and I assume those will work with this system, correct? I am just trying to get everything all ironed out.
"Polished Vortech Supercharger V-2(Comes with Two Pulleys)
Polished After Cooler
Inlet Tube, Filter ,Mass Air Meter,
Diablo MAFia
39lbs Injectors
All Brackets, Tensiors Pulleys, Spacers, Bolts you want be searching the Hardware store for nothing
Complete instructions
All Clamps and Hoses
Cooler Resorvier, Cooler Mounts, Cooler itself, Cooler Pump
PS mount Relocater, PS Hoses
All the Stock Items that must be Modifed already Done...Coolant lines and Crossover
Vortech Diablosport Tunner with 3 Vortech tunes"
I will be getting a dyno tune in my local area, using my current SCT Xcal2.
What else do I need to complete this kit? I know I need a fuel pump upgrade like a KB BAP or GT500 system, but is there anything else? I currently have Steeda CMDP's on my car, and I assume those will work with this system, correct? I am just trying to get everything all ironed out.
11/11/08, 05:32 PM
Shelby GT350 Member
Join Date: April 9, 2007
Location: Ellenton, FL
Posts: 2,463
Likes: 0
Received 0 Likes
on
0 Posts
I"ll say around 430/400. Do we know what type of dyno its being tuned on?
My numbers are off a mustang dyno. I'z gotz some conservative numb3rz posted
I forgot what size pulley Leo was installing. He should post good numbers, I had LT's working against me to build PSI.
My numbers are off a mustang dyno. I'z gotz some conservative numb3rz posted
I forgot what size pulley Leo was installing. He should post good numbers, I had LT's working against me to build PSI.
11/11/08, 05:34 PM
Shelby GT350 Member
Join Date: April 9, 2007
Location: Ellenton, FL
Posts: 2,463
Likes: 0
Received 0 Likes
on
0 Posts
.
11/11/08, 07:14 PM
Hey Tom. Seth called me from Brenspeed today. He said that Saleen was finally delivering the Super Shakers and he was calling the people on his list. I told him I wasn't financially ready right now, but if he gave me the Tom 281 discount I'd swing it. It was to no avail though. I told him I really hoped to be calling him in the spring. Fingers crossed.
11/11/08, 07:53 PM
I guess its time to play this game again...
Where's Leo?
Where's Leo?
11/11/08, 08:36 PM
Shelby GT500 Member
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
11/11/08, 08:55 PM
That centri is seasoned and ready to go! No break-in necessary. 
11/11/08, 08:56 PM
Cobra Member
Join Date: March 3, 2007
Location: Eden Prairie, MN
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
