Stangs w/Steeda Ultra Lites...Shows us
10/11/06, 08:51 PM
#21
Member
Thread Starter
Join Date: September 30, 2006
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
It has to be adjustable, like this:
http://www.lmperformance.com/7576/87.html
Don't order it until you find out if you need it. Some people (TacoBill) get lucky and the rear axle centers itself AFTER you lower it. After you lower it and let the suspension settle for a few weeks, tape a string with a nut on the end over the rear fenderwells. Measure between the string and the edge of the side wall. If it's 1/4" difference from side to side, you'll have to move the axle over 1/8" to correct it.
The funny thing is, you adjust it with the axle on the ground... so you are actually moving the chassis and body one way or the other by adjusting the panhard bar.
http://www.lmperformance.com/7576/87.html
Don't order it until you find out if you need it. Some people (TacoBill) get lucky and the rear axle centers itself AFTER you lower it. After you lower it and let the suspension settle for a few weeks, tape a string with a nut on the end over the rear fenderwells. Measure between the string and the edge of the side wall. If it's 1/4" difference from side to side, you'll have to move the axle over 1/8" to correct it.
The funny thing is, you adjust it with the axle on the ground... so you are actually moving the chassis and body one way or the other by adjusting the panhard bar.
__________________________________________________ ___________
Wow nice looking cars, the more I see the your stangs the more I drool..lol
I went ahead and order them today, Ill get them tuesday. can't wait!
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
21
2/10/17 07:12 PM