Running twin m90 superchargers
#1
Bullitt Member
Thread Starter
Join Date: November 10, 2012
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Running twin m90 superchargers
Two days ago I just purchased a 1990 supercoupe 3.8L engine ad well as two m90 superchargers. I have seen a couple pictures of people running both. I saw this one guy had them stacked on top of each other. Does anybody know how to run both of them like that or have any tips that could help? I talked to an AM worker and he said running both with the proper tune, CAI, and fuel injectors, it would put me close to 400bhp.
#2
Cobra R Member
It would be better to mount them side by side. To do that you would have to have a custom lower intake, fab up some idler brackets, and have a custom air intake. If you mounted them on top of each other you would have to have a very tall hood, a custom intake to go from the outlet of one, to the inlet of the other, a custom air intake, fab up idler brackets. Either way lots of work and lots of research will be needed.
#3
Bullitt Member
Thread Starter
Join Date: November 10, 2012
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
It would be better to mount them side by side. To do that you would have to have a custom lower intake, fab up some idler brackets, and have a custom air intake. If you mounted them on top of each other you would have to have a very tall hood, a custom intake to go from the outlet of one, to the inlet of the other, a custom air intake, fab up idler brackets. Either way lots of work and lots of research will be needed.
#5
Bullitt Member
Thread Starter
Join Date: November 10, 2012
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
#6
Mach 1 Member
Join Date: April 18, 2011
Location: Minnesota
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
I wonder what kind of hood you would need for clearance. That be sick if you didn't have to get a 6in crowl hood. Maybe a cobra r hood Would work?
I remember seeing somewhere forever ago some place makes a 96-98 cobra hood with a 3(I think) inch crowl hood and it looks so good, haven't seen it since then thou.
I remember seeing somewhere forever ago some place makes a 96-98 cobra hood with a 3(I think) inch crowl hood and it looks so good, haven't seen it since then thou.
Last edited by Dbranham; 3/8/13 at 08:33 AM.
#7
NTTAWWT
I don't know if a 3 inch hood will clear it, and 6 inches make it look like you're trying too hard. I'd go side by side, it'll look cooler too!
#9
Bullitt Member
Thread Starter
Join Date: November 10, 2012
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
I wonder what kind of hood you would need for clearance. That be sick if you didn't have to get a 6in crowl hood. Maybe a cobra r hood Would work?
I remember seeing somewhere forever ago some place makes a 96-98 cobra hood with a 3(I think) inch crowl hood and it looks so good, haven't seen it since then thou.
I remember seeing somewhere forever ago some place makes a 96-98 cobra hood with a 3(I think) inch crowl hood and it looks so good, haven't seen it since then thou.
#10
Bullitt Member
Thread Starter
Join Date: November 10, 2012
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
#17
Bullitt Member
Thread Starter
Join Date: November 10, 2012
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts