1988 Mustang Aftermarket Stereo install
12/5/04, 06:35 PM
#1
Member
Thread Starter
Join Date: December 5, 2004
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
hey guys..
First off new to the mustang working here.
And im having some difficulty installing a aftermarket stereo...
I just cannot get the Origional stereo outa the spot.. i fabbed up a coat hanger to slide into the holes on the stock stereo to pull it out but it still will not come out.. i took a nut that was attached to the rear of the deck off (7/16 nut) but she still will not slide out.. Can someone tell me what im missing????
:bang:
First off new to the mustang working here.
And im having some difficulty installing a aftermarket stereo...
I just cannot get the Origional stereo outa the spot.. i fabbed up a coat hanger to slide into the holes on the stock stereo to pull it out but it still will not come out.. i took a nut that was attached to the rear of the deck off (7/16 nut) but she still will not slide out.. Can someone tell me what im missing????
:bang:
12/8/04, 07:55 AM
#2
Member
Thread Starter
Join Date: December 5, 2004
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Much to my disappointment you guys are useless.. this fourm is a complete waste of internet space from what im seeing... not even a suggestion on where to move to... just plain useless 72 hours to answer a post is more than enough time.. and all im seeing is 10 views?? 3/4 of that viewing is probally me lookin as to why there is not a SINGLE reply.. remind me never to come here... :bang: :notnice: :nono: 
12/8/04, 10:12 PM
#3
Bullitt Member
Join Date: May 24, 2004
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
darn!
Pissy are we? Are you using the "coat hanger" on both sides at the sametime and pushing them out to release the radio? When you do that is it unlocking the clips? have you reached around to the back to try and push the radio forward after doing this? Does it feel like the antenna is holding it in?
But whats the difference you arent coming back to this site anyway! Right?
Pissy are we? Are you using the "coat hanger" on both sides at the sametime and pushing them out to release the radio? When you do that is it unlocking the clips? have you reached around to the back to try and push the radio forward after doing this? Does it feel like the antenna is holding it in?
But whats the difference you arent coming back to this site anyway! Right?
12/8/04, 10:39 PM
#4
Post *****
Join Date: May 13, 2004
Location: Berkeley/Redwood City, CA
Posts: 18,614
Likes: 0
Received 3 Likes
on
2 Posts
Dayum, someones not happy! geezus man, maybe you shoulda posted it in the Fox section, where there might be more people able to help you. this is GENERAL car chat after all....
12/11/04, 09:25 PM
#5
Bullitt Member
Join Date: August 1, 2004
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
nah just people.. impatiant.. if he really had any idea what he was doing hed look at his manual that cam with the car ... if he doesnt have the time to do that hes wasting his time asking us...i mean ive posted requests for chops and never got a response dud if you read this you gotta understand that the main part of the site is what you can see when you first load the page.. about 75% of the posts are there .. not down here.. sry i would have tryed if i would have seen it in time
12/12/04, 11:39 AM
#6
Sorry you feel that this is a waste of internet space. Apperently the other 158489 post here from the various 4800+ members say the same thing so why bother. 
Anyways, you will defintely get answers in the fox section, where this should have been in the first place. mayeb someone will still answer your question though you arent coming back.
Anyways, you will defintely get answers in the fox section, where this should have been in the first place. mayeb someone will still answer your question though you arent coming back.
12/12/04, 02:37 PM
#7
V6 Member
Join Date: December 9, 2004
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
darn! you guys are so slow! I posted a message 4 and a half minutes ago on how to change the DUAL QUAD MODULATOR WITHOUT A FOSTEX GRIP and got NO answer!!! This website is a waste... I'm going to go and buy a rice burner with a trumpet exhaust and join a website for it!!!! Boo Hoo :bang:
...shortly after this mesasge JR333 drove his 1.8 liter nissan over a cliff in deep sorrow because the speed shop did not have the custom nissan seat belt pads in his color! RIP
...shortly after this mesasge JR333 drove his 1.8 liter nissan over a cliff in deep sorrow because the speed shop did not have the custom nissan seat belt pads in his color! RIP
12/12/04, 04:31 PM
#8
GTR Member
Join Date: October 30, 2004
Posts: 4,989
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by JR333@December 12, 2004, 3:40 PM
darn! you guys are so slow! I posted a message 4 and a half minutes ago on how to change the DUAL QUAD MODULATOR WITHOUT A FOSTEX GRIP and got NO answer!!! This website is a waste... I'm going to go and buy a rice burner with a trumpet exhaust and join a website for it!!!! Boo Hoo :bang:
...shortly after this mesasge JR333 drove his 1.8 liter nissan over a cliff in deep sorrow because the speed shop did not have the custom nissan seat belt pads in his color! RIP
darn! you guys are so slow! I posted a message 4 and a half minutes ago on how to change the DUAL QUAD MODULATOR WITHOUT A FOSTEX GRIP and got NO answer!!! This website is a waste... I'm going to go and buy a rice burner with a trumpet exhaust and join a website for it!!!! Boo Hoo :bang:
...shortly after this mesasge JR333 drove his 1.8 liter nissan over a cliff in deep sorrow because the speed shop did not have the custom nissan seat belt pads in his color! RIP
:scratch:
12/12/04, 05:35 PM
#9
The Man... keeping you down.
Join Date: August 15, 2004
Location: Stealin' ur internetz
Posts: 823
Likes: 0
Received 1 Like
on
1 Post
Originally posted by Nick_Pausch@December 5, 2004, 8:38 PM
hey guys..
First off new to the mustang working here.
And im having some difficulty installing a aftermarket stereo...
I just cannot get the Origional stereo outa the spot.. i fabbed up a coat hanger to slide into the holes on the stock stereo to pull it out but it still will not come out.. i took a nut that was attached to the rear of the deck off (7/16 nut) but she still will not slide out.. Can someone tell me what im missing????
:bang:
hey guys..
First off new to the mustang working here.
And im having some difficulty installing a aftermarket stereo...
I just cannot get the Origional stereo outa the spot.. i fabbed up a coat hanger to slide into the holes on the stock stereo to pull it out but it still will not come out.. i took a nut that was attached to the rear of the deck off (7/16 nut) but she still will not slide out.. Can someone tell me what im missing????
:bang:
12/12/04, 07:30 PM
#10
GT Member
Join Date: November 10, 2004
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
I just had to give it a shot ..................................
Possible hint .............................
I cramed the hangers in DEEP while giving it a little wiggle.
I mean DEEP DEEP............................
Just hard enuff to hear a pop sound. Then shes out of there.
Possible hint .............................
I cramed the hangers in DEEP while giving it a little wiggle.
I mean DEEP DEEP............................
Just hard enuff to hear a pop sound. Then shes out of there.
12/12/04, 07:42 PM
#12
GT Member
Join Date: November 10, 2004
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Truly there is something about wiggle and cramming to hear a pop.
Your getting rid of it with a new one so don't be afraid to go deep.............................................. ..........................
Your getting rid of it with a new one so don't be afraid to go deep.............................................. ..........................
Thread
Thread Starter
Forum
Replies
Last Post