Mirror tap for radar detector
9/24/15, 06:39 PM
#1
Member
Thread Starter
Join Date: September 19, 2015
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Mirror tap for radar detector
Someone please tell me what color wires to tap into for power and ground and please don't tell me to get a voltage meter. This is a 2015 mustang gt base model only. I only want to tap into mirror not fuse box.
10/23/15, 09:58 AM
#2
Member
Join Date: October 19, 2015
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I just did this on my 14GT - so don't know if you have the same mirror - but for mine, the switched 12V was pin 1 (had a larger blue wire going in) and ground was pin 4 (black yellow wire in). I have a 16 pin block.
it works a treat - comes on with ignition on and switches off when key out and door opened (like the stereo)
good luck!
it works a treat - comes on with ignition on and switches off when key out and door opened (like the stereo)
good luck!
Thread
Thread Starter
Forum
Replies
Last Post
MRGTX
2015 - 2023 MUSTANG
4
9/16/15 08:08 AM