When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That's what I did. Just called up White Bear and told the guy what options I wanted. 2014 with nav and heated seats. He got me the correct one.
Update on mine. I just received the rest of my order and Realized I ordered the wrong gps splitter. antennae satellite/GPS splitter harness ($30) - AR3Z 10E928 A This was actually $152 at white bear. Just ordered.
That's what I did. Just called up White Bear and told the guy what options I wanted. 2014 with nav and heated seats. He got me the correct one.
Update on mine. I just received the rest of my order and Realized I ordered the wrong gps splitter. antennae satellite/GPS splitter harness ($30) - AR3Z 10E928 A This was actually $152 at white bear. Just ordered.
Um, wow. There's some price gouging or something going on there. It was $29.70 when I ordered it in December.
can anyone look at their factory 2013-2014 Shaker amp under the drivers kick panel and tell me if there is a black plug and gray plug with an open plug port in between the two? My base car never had an amp and I added it with the nav swap. Everything is working except for my Shaker door subs. I can't figure it out even after months of research. Its driving me nuts. Thanks!-Steve
Started this project today. Could not get the dash completely off, but I think I can swap out the harness as is. Praying I can get everything put back together.
Ok so I got everything installed, but I am not getting a display. It just shows white. If I touch the screen, it will beep. The radio works. Just can't tell if anything else works. Any ideas?
Ok so I got everything installed, but I am not getting a display. It just shows white. If I touch the screen, it will beep. The radio works. Just can't tell if anything else works. Any ideas?
Sounds like either the display cable is bad or your display is busted. What kind of "white" is it? Can you get a picture?
Yeah, that's probably going to either be the display cable since the backlight is working, but doesn't appear to be getting a signal (double check that all the cables are plugged into the display and they aren't loose. Unlikely, but maybe a tab is broken and isn't holding them in correctly) or there is an issue with the display itself and you'll need to replace it.
hmmm...also just realized that only hot air is coming out of vents. I did replace the climate system harness. Guess I have some work to do whenever I can find the time.
hmmm...also just realized that only hot air is coming out of vents. I did replace the climate system harness. Guess I have some work to do whenever I can find the time.
Assuming that you plugged in everything properly, and none of the pins are broken or bent (this happens more often than you think), then either the monitor is bad of the wires to the monitor are bad. Sorry I can't be more help than that.
As for the hot air blowing, did you plug in the plug for the blend door motor into the driver's side or the passenger side? It now needs to plug into the driver's side.
Assuming that you plugged in everything properly, and none of the pins are broken or bent (this happens more often than you think), then either the monitor is bad of the wires to the monitor are bad. Sorry I can't be more help than that.
As for the hot air blowing, did you plug in the plug for the blend door motor into the driver's side or the passenger side? It now needs to plug into the driver's side.
Thank you Jim for responding.
The wire (on the climate harness) that goes behind the evaporator core....where does that get plugged into? I realized that I just cut that wire to get the original climate harness out of the car and did not plug that into anything. I saw your post that you routed it in front, but where did you plug it into? Can I tap into the wire I cut and left dangling?
Also, on the back of the actual unit, I have something plugged into everything except the white female plug. I see a white male plug right there from the main harness, but it does not fit.
There is a very good chance I may have bent a pin for the monitor or the unit itself. It was a long day and may have forced some thing in. I'll double check all the pins.
Ok, so I have the climate harness completely installed. The A/C still does not work properly. I can hear everything working, but the cold is non existent. I was told by a ford technician that the screen has to be functioning for the AC to work properly. Anyone know if that's the case? I did check the pins in the pack of the screen and the nav unit and none of the pins are bent. I'm guessing a bad screen.
However, with that being said, what is the extra white plug in the back of the nav unit? I have something plugged into everything except that. I have an extra white plug, but it does not fit into the female end on the nav unit. The other end of it appears to plug into the screen.
I will check to see if the a/c works without the screen plugs in to confirm. If it does work without the the screen, then I am thinking you have the plugs in the wrong places. I am starting to forget quite a bit of what was involved with this mod, but I will recheck where you are to plug everything for climate. I remember that I had to plug one into the opposite side of where it was normally. I will check later.
7/22/15, 09:21 PM
