How to remove center console?
#1
Cobra Member
Thread Starter
How to remove center console?
I appreciate any help. I don't have my Haynes manual with me, and want to install some dynamat under the center console when I put in my new MGW short throw shifter.
Thanks for the help folks.
Thanks for the help folks.
#3
Legacy TMS Member
Go to search mode and look for a file called Installing a nav radio in a 2005 mustang. It will walk you through the removal and installation, with pictures.
#4
Cobra Member
Thread Starter
#5
Join Date: August 23, 2004
Location: Bay Area, California
Posts: 3,599
Likes: 0
Received 3 Likes
on
2 Posts
Incase you haven't done it yet;
1. Remove shift ****
2. Pull out shifter bezel
there are two screws in the front that hold the console to the dash, I think they are 8 mm
3. Pull out the inside of the center console storage part. Just yank.
4. There are two screws under there, remove these, and all the fasteners are out.
5. Pick up the console from the back and pull backward until you can disconnect the harness plugged in underneath.
From this point you will be able to yank it out.
1. Remove shift ****
2. Pull out shifter bezel
there are two screws in the front that hold the console to the dash, I think they are 8 mm
3. Pull out the inside of the center console storage part. Just yank.
4. There are two screws under there, remove these, and all the fasteners are out.
5. Pick up the console from the back and pull backward until you can disconnect the harness plugged in underneath.
From this point you will be able to yank it out.
Thread
Thread Starter
Forum
Replies
Last Post
Diode Dynamics
Vendor Showcase
3
6/12/18 03:26 PM
Diode Dynamics
Vendor Showcase
7
2/28/18 09:37 AM