Shelby Razor Wheels Questions
#142
#144
I'm thinking 40mm, 'cause 265/35R20 with 40mm was set in just a bit more than I want, but add another 10mm on the width of the tire might make it about right.
#147
Mach 1 Member
Join Date: November 29, 2005
Location: Chicagoland
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
And yes, 255's will fit great. These's lot's of pics in this thread of this setup. Plus, 255's are a much cheaper tire.
#148
Can anyone who is running these wheels or the Shelby Razor's tell me if I will be able to use my stock lugs or if I need to buy some new "specific" lugs for these wheels? I have my 20" Chrome Shelby Razor's on the way and don't want anything to delay me putting them on when they arrive. =]
Thanks for any help that you can offer.
Bryan
Thanks for any help that you can offer.
Bryan
#149
You can use them, but they're going to cut into the finish inside the hole, I bought new ones myself at autozone, the size is 1/2 - 20 with a conical seat. You'll also need to use a spark plug type thin wall deep well socket to put them on or take them off. The lug wrench in the trunk will not fit in the holes.
#150
You can use them, but they're going to cut into the finish inside the hole, I bought new ones myself at autozone, the size is 1/2 - 20 with a conical seat. You'll also need to use a spark plug type thin wall deep well socket to put them on or take them off. The lug wrench in the trunk will not fit in the holes.
Thanks much for the heads up. I figure the wheels are gonna get enough just from my driving and the road, no sense messing them up on purpose by being a cheap *** and not getting the correct lugs. I'll prolly hit autozone tomorrow and see what I can find there.
Thanks again.
Bryan
#153
Team Mustang Source
Currently waiting on Fedex to deliver mine today.
I want to thank everyone that posted info and photos in this thread. It was a big help in making sure I ordered exactly what I wanted/needed.
I went with 20" Gunmetal Shelby Razors w/ 40mm offset (the car is lowered) and General Exclaim UHP tires in 255-35ZR20 size.
Really looking forward to seeing them on the car.
I want to thank everyone that posted info and photos in this thread. It was a big help in making sure I ordered exactly what I wanted/needed.
I went with 20" Gunmetal Shelby Razors w/ 40mm offset (the car is lowered) and General Exclaim UHP tires in 255-35ZR20 size.
Really looking forward to seeing them on the car.
#154
Team Mustang Source
Put mine on yesterday, did a 400 mile rally trip today...
REAL happy with the way the Razor/tire package looks/performs....
Edit: Some pics from today (much nicer weather)
REAL happy with the way the Razor/tire package looks/performs....
Edit: Some pics from today (much nicer weather)
#156
Team Mustang Source
I'm REAL happy with them. I agonized over what wheels to get seemingly forever, then it was a mental battle whether to go 18" or 20". I'm satisfied with the decision (except I'm thinking I may remove my Pony tribars from the fenders. Somehow it irks me a bit having both the cobra emblem caps and the ponies right next to each other
Thread
Thread Starter
Forum
Replies
Last Post
mark0006
GT350
35
9/5/15 12:14 PM